非结构子网格压力方法

纯拉氏流体力学计算失败的根源是砂漏运动和虚假涡旋,运用子网格拉氏质量与其相关的子网格密度得到子网格压力,子网格压力产生的扰动隅角力能消除这些虚假运动,以便消除困扰拉氏流体力学算法的网格畸变带来的数值计算困难.将包括子网格压力的相容流体算法推广到非结构网格,研制包括非结构子网格压力的相容流体程序,对Saltzman活塞问题进行数值模拟,从数值结果分析可知,非结构子网格压力方法能抑制虚假涡旋,消除砂漏畸变.     

图像处理技术在低逸出功印刷型FED中的应用

采用低成本、大面积、低逸出功FED阴极材料及其阴极浆料,研制了大面积印刷式FED(样机),具有自主知识产权,在国内外属首创。介绍了低逸出功可印刷型场致发射显示系统的工作原理、数字视频图像的转换和处理、视频数据的传输、列灰度驱动和行驱动集成电路以及FPGA控制技术等。为了改善场致发射显示器的显示效果,通过理论分析和实际验证提出了亮度非均匀性校正、γ校正、自动功率控制等相应的解决方案。将图像处理技术应用到驱动电路中,改善了图像的亮度均匀性和灰度再现质量,降低了整机的功耗。首次将本技术应用于大屏幕低逸出功印刷型63.5cm(25英寸)VGA级彩色FED驱动系统中,研制出了能显示彩色视频图像的彩色FED显示器样机。亮度达400cd/m2、对比度为1000∶1,电路灰度等级为256级。     

湍动雾化射流液雾粒径分布的数值模拟

对水在空气中湍动雾化射流的气液两相流场进行了数值模拟.其中,气体流场采用k-ε湍流模型进行模拟,给出了载气轴向速度的分布情况.对喷雾粒子的运动采用颗粒轨道法,建立粒子破碎和碰撞的数值模型,研究了液雾粒径在不同工况下沿轴向的变化趋势.数值模拟结果与实验结果在多种气液比下进行了比较,两者吻合较好.同时,分析了初始粒径和粒子总数及喷嘴尺寸对液雾粒径变化趋势的影响,讨论了有助于粒径均匀分布的条件.     

三唑磷-鲁米诺-H2O2发光体系的研究与应用

研究了碱性介质中三唑磷-鲁米诺-H2O2体系的化学发光特征,建立了三唑磷流动注射化学发光分析方法,并对反应机理进行了探讨.研究了三唑磷-鲁米诺-H2O2体系的化学发光反应动力学,考察了pH、流速、鲁米诺-H2O2配比等因素对化学发光的影响.在最佳条件下,过氧化氢HOO-负离子可能与三唑磷的磷原子反应生成磷的过氧化合自由基,与鲁米诺作用使得体系化学发光得到增强,3s内达到了最大值;应用于三唑磷的测定,在1.0×10-8-1.0×10-5g/mL范围内呈良好的线性关系,检出限(S/N=3)为6.7×10-9g/mL;测定蔬菜样品,三唑磷浓度分别为1.0-5.0μg/mL时,测定回收率为82.3%-108.6%,测定偏差为1.6%-4.7%.     

Observation of Diffusion Process of a Water Droplet Immersed in Protein Solution in Microgravity

Pure liquid-liquid diffusion driven by concentration gradients is hard to study in a normal gravity environment since convection and sedimentation also contribute to the mass transfer process. We employ a Math Zehnder interferometer to monitor the mass transfer process of a water droplet in EAFP protein solution under micro- gravity condition provided by the Satellite Shi Jian No 8, A series of the evolution charts of mass distribution during the diffusion process of the liquid droplet are presented and the relevant diffusion coefficient is determined.     

Coherent Scattering of Light by Bose-Einstein Condensation in a Tight Confinement

We have observed strong scattering of a probe light by dilute Bose-Einstein condensate （BEC） ^87Rb gas in a tight magnetic trap. The scattering light forms fringes at the image plane. It is found that we can infer the real size of the condensation and the number of the atoms by modelling the imaging system. We present a quantitative calculation of light scattering by the condensed atoms. The calculation shows that the experimental results agree well with the prediction of the generalized diffraction theory, and thus we can directly observe the phase transition of BEC in a tight trap.     

High-Pressure Phase Transition in CTAB-Micellar Solutions： A Raman Spectroscopic Study

We use a diamond anvil cell for the first time to investigate the Raman spectra of an aqueous micellar solution of hexadecyltrimethylammonium bromide （CTAB） at pressures up to 3.85 GPa. The pressure-induced phase transition between the micellar and coagel phases is found to occur at 0.64 GPa and 60℃. This phase transition has a pressure hysteresis, and thus exhibits the first-order phase transition properties. Further experimental results show that although the structure of the coagel phase is similar to that of the CTAB crystal, the interchain distance is slightly larger in the coagel phase than that in the CTAB crystal.     

Measurement of D(d,p) T Reaction Cross Sections in Sm Metal in Low Energy Region (10≤Ed≤20keV)

To study the screening effect of nuclear reactions in metallic environments, the thick target yields, the cross sections and the experimental S(E) factors of the D(d,p)T reaction have been measured on deuterons implanted in Sm metal at 133.2K for beam energies ranging from 10 to 20keV. The thick target yields of protons emitted in the D(d,p) T reaction are measured and compared with those data extrapolated from cross sections and stopping power data at higher energies. The screening potential in Sm metal at 133.2K is deduced tobe 520±56eV. As compared with the value achieved in the gas target, thecalculated screening potential values are much larger. This screening potential cannot be simply interpreted only by the electron screening. Energy dependences of the cross section σ(E) and the experimental S(E) factor for D(d,p)T reaction in Sm metal at 133.2K are obtained, respectively.     

大能量钕玻璃棒状激光器新型热管理技术

 针对kJ级大能量钕玻璃固体脉冲激光器，对比研究了传统恒温水冷方式和采用加热控制的新型热管理技术下的激光棒温度分布情况。结果表明，采用新型热管理技术可大大降低棒内温度梯度，减小泵浦过程中的热效应，确保大能量激光输出；而且加热循环水的最佳升温值在单泵浦脉冲引起的激光棒平均温升值附近，使得径向温差最小，该最佳升温值与脉冲间隔时间有关,比如脉冲间隔15 s时，循环水在每个脉冲过后的最佳升温值为单泵浦脉冲引起的激光棒平均温升值的0.85倍；采用加热控制后水温和激光棒温度整体升高，因此在工作一个脉冲串后，必须恢复激光棒温度到初始状态，然后再进行下一个脉冲串工作。     

1.2 MV大功率直流高压电源研制

 采用等边三角形结构的铁芯，次级线圈分成40级，分别进行三相全波整流，每级输出直流30 kV，串联后获得1.2 MV/A的直流高电压大功率输出。电源的能量转换效率大于95%，漏抗高达21.7%。采用无滤波电容结构，次级线圈星型/三角型接法交替使用，纹波系数小于±4%。整个电源密封在压力钢筒中，充0.8 MPa高纯度SF6气体作为绝缘介质，最大工作场强小于130 kV/cm。设计了专门的SF6气体冷却系统，气体温度控制在60 ℃以内，高电压由充气同轴传输线输出。在小负载条件下，电源各项指标满足技术要求，已经安装在1.2 MW，1.2 MeV大功率直流电子加速器上进行整机联调。